The ESB08SL Fast Ethernet Switch is designed for SOHO (Small Office/Home Office) or workgroup users. All 8 ports support auto MDI/MDIX, One of the ports is 100M and designated as an uplink. All the ports support VLAN division(based on port and tag), port speed limit, broadcast storm suppression and priority control, so that it can realize Qos division and guarantee of multiple network business. It also supports cluster management and network physical topology detection. It is equipped with powerful network management software, which can realize remote network management by logging in Web, and the network management information can pass through router and firewall.

Technical Features:
* The equipment provides 8 high-speed Ethernet ports
* The equipment has standard design and inner power switch
* The equipment has qualified circuit and technological design, which are suitable for long time use or working under harsh environment
* The equipment supports Web log in function which can log in configuration interface to change settings by logging in Web
* The equipment supports standard SNMP remote network management
* The equipment supports various layer two switching and controlling functions and can applied to various application internet environments.
* The equipment supports cluster management.
* The equipment has optimized design against lightning stroke with its level up to 3.5KV

Hardware Function:
* All switches shall be tested for high temperature aging before delivery to ensure steady and reliable operation under harsh environment
* The switch adopts multiple mechanisms internally to effectively resist violent fluctuation of network voltage and lightning stroke.
* The operation and maintenance personnel can configure and control the switch and detect its status at any location through the network management software as the Ethernet Switch can remotely configure and control the switch and detect its status.
* Work mode of the port can be configured(10/100M, half/full duplex and self-adaption)
* All the ports support Flow Control
* All the ports support Port-based VLAN and IEEE 802.1Q Tag VLAN.
* The switch can add and delete VLAN tag for data package received and sent by each port in accordance with IEEE802.1Q and tag value of VLAN can be 1~4094
* All ports support two-way bandwidth limitation
* All ports can perform priority in accordance with the port or 802.1P
* The equipment supports SP and WRR to perform priority control
* The switch supports IGMP Snooping
* All the ports support broadcast storm suppression
* The switch supports port isolation
* The switch supports imagining function of all ports
* The switch supports STP(Spanning Tree Protocol)
* The switch provides datagram filtering, including the filtered mode based in MAC address, IP address and TCP/UDP port.
* The switch performs cross/parallel wire self-adaption to facilitate installation of the equipment
* The port of the switch can be turned on or off through the control end of network management program
* Bandwidth of each Ethernet port can be set respectively
* The switch can store the newest configuration information, and every time when the equipment is electrified the used settings shall be the same, and data storage time not shorter than 10 years
* The switch can return to bare machine mode from working mode conveniently, to facilitate redeployment of the equipment
* The equipment has standard design to facilitate the installation

Software Function
* Web log in and management:
* SNMP management
* Telnet Management.